Many bobblehead lovers are curious with regards to how custom bobblehead is generated and why it always takes weeks to help make one. In a advanced level, you can find four steps involving in making a custom bobblehead doll: sculpting, molding, polishing, and painting, excluding the preparation work and final shipping. Prior to getting into details of each step, it is actually worth mentioning how the process described is for the resin-based bobblehead.
1. Sculpting (Under a day to seven working days)
This step takes a mastery of hand sculpting skills. It is usually carried out by skillful artists, who normally have many years of experience doing hand sculpting depending on provided photos or reference objects. It may take 4 to 5 hours for the very experienced artist to sculpt a 7-inch bobblehead, while for any less experienced artist it may take a lot more than a couple of days. When the initial sculpting is finished, the consumer will have the opportunity to check its photos. Making changes is pretty simple and easy quick at this time. Alternatively, it will likely be more expensive to request a change at the later stage as the whole sculpture should be rebuilt. Therefore, a consumer should check out the initial sculpture carefully if the bobblehead maker is requesting comments. If you are unsure, you need to demand more photos or require clarification. By doing that, you could possibly take more time upfront, but you will also minimize the chance of needing to have the bobblehead reworked later and getting to pay for more. Also, the individual must be aware that the custom bobblehead doll is generated based on submitted photos rather than a live person. Therefore, the expectation must be set properly regarding the resemblance and facial expression in the final bobblehead doll.
2. Molding (7-10 working days)
Molding is the method in which the initial sculpture through the previous process will be utilized for basics to develop the profile and curvatures of any bobblehead’s body and head. First, a semi-liquid silicone gel will likely be used on the top of the initial sculpture. A soft silicone coating which takes the design from the custom sports bobbleheads will be formed when the gel dries. Then, a plaster coating will be applied at first glance from the silicone coating. The plaster coating can become a hardened cast right after the drying process. Subsequently, the primary sculpture will be removed from the silicone coating. Once the preparation work is done, melted resin will probably be injected into the emptied silicone coating to produce the bobblehead. Ever since the silicone coating is soft, the plaster cast wrapping the silicone coat will act to maintain the resin within the desired shape before it is actually solidified. As soon as the resin becomes solid, it will be taken out by opening the plaster and peeling from the silicone coating. Right now, a raw bobblehead doll has been given.
3. Polishing (someone to three working days)
A raw bobblehead will not be able to be painted. It provides grease on its surface that must be removed, and rough surfaces that need to be ground smooth. Neglecting the polishing process can result in poor painting afterwards. Polishing a bobblehead doll also needs a decent level of craftsmanship. Because its shape and curvature will vary from a single to a different one, this process still can not be standardized and automated. As well as taking off the grease and smoothing the outer lining, refining the raw bobblehead details manually might be necessary. As a consequence of tolerances stemming in the molding process, deviation from your initial sculpting is unavoidable. The sculpting artist often must fine-tune the raw bobblehead following the initial polishing, and this process may need to be reiterated. When it is determined the defects can not be fixed, the full raw bobblehead must be scrapped.
4. Painting (someone to three working days)
Painting will not be as elementary as it appears to be. The initial step is to blend base colors to make colors the consumers desire. The standard of the blended colors is crucial, as it has a large impact on the aesthetic aspect of the bobblehead. Also, because every bobblehead may have its unique colors, simply making the desired colors with good quality for wedding bobbleheads can be extremely time-consuming. Secondly, painting is done utilizing the painting brush manually, due to the b0bbleheads painting areas and complex surface curvatures. Moreover, customers often ask to create different patterns on the clothing. In these cases, the painting artists will be asked to alternate different painting brushes on those tiny areas, and that is a demanding task. Once paints are put on a bobblehead doll both for its head and body, it might be assembled through a spring with glue on both ends. Obviously, utilizing the spring is what makes the bobblehead doll bobble.
Hopefully, right now, whoever finishes reading the above mentioned has had a better knowledge of the basic procedure of setting up a custom bobblehead doll. With a better idea of the method, a consumer can better plan his or her next purchase of a custom bobblehead doll.